HUDACAPP— 一种工艺规程自动设计系统

本文介绍浦沅工程机械总厂准柔性制造系统(P-FMS)中加工箱体零件所用的一个工艺规程自动设计系统—HUDACAPP,阐述了系统的原理、结构和实现.给出了实例.本系统能按零件输入信息自动生成工艺过程,选择机床、夹具、刀具、量具、切削参数以及计算工时,并能与P-FMS的实时管理调度软件联接,提供所需的资料.     

Differences in Wheat Cultivar Response to N Supply. I: Differences in Grain Yield Formation

Two-year field trials with winter wheat cultivars Batis and Toronto were conducted in Southern Bavaria, Germany, to investigate the possible causes of cultivar differences in response to N supply varying in total amount and time of application. Cultivar-related differences in grain yields were observed in treatments with low and medium N supply. High doses of N supply resulted in grain yield adjustment or grain yield advantage for cv. Toronto. The results of this study revealed a consistent, genotypic pattern in response to N fertilization in spite of strong seasonal effects. Systematic modifications in canopy growth rates in response to N supply were of particular relevance and a main factor for differences in tillering intensity resulting in modified stand densities. In the present study, cultivar differences in spike development and interactions with N supply related more to abortion than to initiation processes for number of spikelets and number of flowers per spikelet. High grain density (grains per m²) of cv. Toronto was evident during reproduction stages even under conditions of medium N supply. However, decreased growth rates during the later part of grain filling in combination with low 1000 grain weight, which was barely modified by N fertilization, allowed only partial utilization of this potential. It is assumed that sink limitations were of particular relevance for grain yield development in cv. Toronto, while cv. Batis combined a less intense response to N supply with more stability in the development of grain yield components.     

对小麦F1代正反杂交组合的灰色关联度分析

运用灰色系统的理论和方法,对2002～2003年18个小麦F1代正反杂交组合的7个主要性状进行综合分析,计算其灰色关联度,分析正反杂交组合的差异,结果表明:200237品系最好,200212品系次之,200246品系最差.同时只有200237和200238、200213和200214品系的正反杂交组合表现为优良组合.     

Trends in NE Atlantic landings (southern Portugal): identifying the relative importance of fisheries and environmental variables

Time series of commercial landings from the Algarve (southern Portugal) from 1982 to 1999 were analyzed using min/max autocorrelation factor analysis (MAFA) and dynamic factor analysis (DFA). These techniques were used to identify trends and explore the relationships between the response variables (annual landings of 12 species) and explanatory variables [sea surface temperature, rainfall, an upwelling index, Guadiana river (south‐east Portugal) flow, the North Atlantic oscillation, the number of licensed fishing vessels and the number of commercial fishermen]. Landings were more highly correlated with non‐lagged environmental variables and in particular with Guadiana river flow. Both techniques gave coherent results, with the most important trend being a steady decline over time. A DFA model with two explanatory variables (Guadiana river flow and number of fishermen) and three common trends (smoothing functions over time) gave good fits to 10 of the 12 species. Results of other models indicated that river flow is the more important explanatory variable in this model. Changes in the mean flow and discharge regime of the Guadiana river resulting from the construction of the Alqueva dam, completed in 2002, are therefore likely to have a significant and deleterious impact on Algarve fisheries landings.     

基于果实相关性状的桃品种初级核心种质取样策略研究

以国家种质资源圃(北京)编目的558份桃品种的18个形态学和农艺学性状为基本数据,研究了桃品种初级核心种质构建的取样策略,包括总体取样比例的确定及取样方案的选择,以获得最佳的初级核心种质。本试验共设10%～90%9个总体取样比例;取样方案研究包括分组原则和组内取样比例的确定。结果表明,桃初级核心种质的适宜总体取样比例为10%;按品种类群分组结合多样性比例取样为构建桃初级核心种质的最佳取样方案;利用此取样策略从558份桃品种中提取56份作为核心样本,对其代表性进行检测表明所构建的初级核心种质能够很好地代表桃原始种质的遗传多样性。     

干旱区20个紫花苜蓿品种抗旱性研究

该试验测定了20个苜蓿品种的水势、总含水量、自由水量、束缚水量、束/自比以及渗透调节物质.从植物水分生理与生化方面,测试各品种的抗旱性,并结合产草量、品质进行综合评价.从中选出5～6个抗旱性较强、产草量高、品质较好的苜蓿品种,为干旱区选择适宜的苜蓿品种提供具有实用价值的基础资料.     

LLDPE/PS塑料合金及其与木纤维形成复合材料的研究

研究线性低密度聚乙烯(LLDPE)与聚苯乙烯(PS)共混制备的塑料合金的性能并用不同制备条件的塑料合金与木纤维复合形成塑料合金/木纤维复合材料,研究该种复合材料的外观质量及物理力学性能.结果表明:不同共混比例与共混温度对制备的塑料合金熔体流动性、力学强度有较显著影响.塑料合金/木纤维复合材料的性能与塑料合金共混比例及共混温度有较强的相关性.2种塑料在共混比为50/50,共混温度为200℃时,形成的塑料合金与木纤维具有相对最好的相容性和最好的材料外观质量与力学性能.DMA试验表明:塑料合金/木纤维复合材料的耐热性明显优于相应的塑料合金.     

再论生长的冗余

生长冗余概念是由盛承发在１９９０年首先提出来的。本文从作物个体与群体对立统一关角度出发提出了作物生长冗余的一个解释。盛承发提出的随机波动环境假说可以导致生长冗余的产生；但是，他从物种利益角度出发解释生物进化还有待商榷。本文还综述了黄土高原阗干旱雨养农业地区小麦根系生长冗余问题，并根据前入工作提出适度增加播种深度和苗期叶片刈割等高产栽培措施。     

论塞罕坝森林－草原交错带林业发展策略

在分析塞罕坝林场基本情况、存在问题及优势条件的前提下，提出了该场的林业发展策略：以林为本，林以育为主，育以科学为基础；育林、护林、造林、改造和调整相结合；以木材生产为龙头，以森林旅游和多种经营为双翼，以山草盆花生产及森林食品开发为凤尾，林、工、商、贸综合发展。文中就森林经营、木材加工、森林旅游、植物资源开发、动物养殖以及资源多样性保护提出了策略性建议。     

家蚕第2隐性赤蚁的遗传学研究——Ⅱ.ch-2基因的连锁分析

Ch-2基因是继ch之后新发现的一种隐性赤蚁ch-2基因与pM(2)、Ze(3)、L(4)、Pe(5)、E~(EL)(6)、q(7)、st(8)、I(9)、w-2(10)、ms(12)、cf(13)、U(14)、Se(15)、cts(16)、B_m(17)、nb(19)、rb(21)、or(22)、sp(23)、Nd(25)、及Y_m等各标志基因都是独立遗传.Ch-2与mln杂交F_2代分离+ch-2+min:ch-2+min:ch-2mln:ch-2mln=523:284:231:0≈2:1:1:0;ch-2与elp杂交F_2代分离+ch-2+elf:ch-2+elp:+ch-2elp:ch-2elp=219:97:68:0≈2:1:1:0,充分说明ch-2与mln、elp是连锁遗传的,即ch-2基因位于第18连锁群.